GWEIKE G2 Max 50W Fiber Laser Engraver vs Monport 60W JPT MOPA Fiber Laser
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
GWEIKE
$2,499
Monport
$3,749.99
Spec-by-Spec Comparison
| Spec | GWEIKE G2 Max 50W Fiber Laser Engraver | Monport 60W JPT MOPA Fiber Laser |
|---|---|---|
| Wattage | 50 W | 60 W |
| Laser Type | Q-Switched | MOPA |
| Laser Source | Raycus | JPT |
| Work Area (W) | 150 mm | 175 mm |
| Work Area (H) | 150 mm | 175 mm |
| Galvo Speed | 15000 mm/s | 8000 mm/s |
| Color Marking | Yes | Yes |
| LightBurn | Yes | Yes |
| Autofocus | No | No |
| Weight | 6.5 kg | 5 kg |
| Software | LightBurn + EZCad | BSLcad + LightBurn (galvo license required separately) |
| Pulse Width | N/A (Q-Switched, 20–200kHz frequency range) | 2–500ns |
| Price | $2,499 | $3,749.99 |
| Rating | 7.8/10 | 7.5/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
GWEIKE G2 Max 50W Fiber Laser Engraver
Pros
- 50W Raycus fiber at 15,000mm/s is the highest wattage-speed combination in this price bracket — deep engraving to 5mm on metal is a documented standout capability no 30W machine at any price matches
- GWEIKE's LightBurn driver is the most actively maintained of any Chinese fiber laser brand — after the initial x/y axis calibration, LightBurn integration runs without the COR file gymnastics that ComMarker requires
- 150×150mm work area with 50W handles large plaques, long knife blades, and production batch runs on a single setup
- Active LightBurn settings ecosystem with a 37-material community settings pack (Etsy) specific to the G2 Max 50W covering metals, plastics, and stone
- 6.5kg portable form factor with detachable laser head — the same lightweight chassis as the G2 Pro 30W, not the heavy industrial frame you would expect at 50W output
Cons
- NOT a MOPA laser — earlier specs on this site incorrectly listed it as MOPA/JPT; it is a Raycus Q-switched fiber laser; no controllable pulse width, no MOPA-quality color marking libraries
- Calibration out of box requires x/y axis swap in LightBurn — documented by a verified owner (machinesformakers.com, Sep 2025); not a defect but a configuration step GWEIKE's documentation does not explain
- Compare this 50W Q-switched configuration with current 60W MOPA offers by exact source, field, controller, and workflow rather than expired prices
- Color marking is thermal oxidation, not MOPA — achievable on stainless and titanium with tuning but less consistent and less repeatable than a JPT MOPA; best-lasercutter.com explicitly notes this limitation
- No enclosure, no autofocus, and documentation rated poor by multiple owners — 50W Class 4 open-beam requires full PPE and a controlled workspace from day one
Monport 60W JPT MOPA Fiber Laser
Pros
- The current title identifies a 60W JPT MOPA configuration, 6.9-inch square field, and rotary axis; confirm the exact bundle with the seller
- 175×175mm work area confirmed on the Amazon listing — accommodates full-size tumblers with a rotary chuck without lens swaps
- LightBurn galvo support confirmed via BSLcad controller — Amazon listing explicitly states 'All Monport fiber marking machines can be operated using Lightburn'
- 1–4,000kHz frequency range and 2–500ns pulse width provide the full MOPA parameter envelope for stainless steel color marking and titanium anodization
- 60W output is meaningfully faster than 30W for deep engraving — depth-map coin engraving documented by a Reddit owner using LightBurn 3D slice at production-viable speeds
Cons
- Only 16 Amazon ratings — too thin to verify factory QC or catch edge-case failures; at this wattage, a single DOA unit would represent 6% of all reviews
- No community material libraries for BSLcad exist anywhere — owners building color marking settings start from zero; the LightBurn parameter libraries that circulate for OMG Laser and ComMarker do not transfer
- In buyer comparison threads for 60W MOPA, Monport was explicitly excluded from recommendations due to 'unclear specs, lack of real user feedback' — OMG Laser and Haotian dominate those conversations
- MOPA settings complexity is brand-documented as brutal for newcomers — one Reddit owner described the transition from CO2 as 'feeling like I've never used technology before' with their Monport MOPA
- 60W is a Class 4 open-beam laser — no enclosure, invisible 1064nm infrared beam, requires OD5+ eyewear and a dedicated controlled workspace; not a beginner purchase at any price
Our Verdicts
GWEIKE G2 Max 50W Fiber Laser Engraver
The GWEIKE G2 Max 50W is a Q-switched, 50W configuration for buyers prioritizing engraving speed over MOPA pulse control. The verified Amazon offer was $2,499 on July 10, 2026. Compare it against current 60W MOPA offers by exact source, controller, work area, and support rather than the expired $1,199 comparison.
Monport 60W JPT MOPA Fiber Laser
The Monport 60W MOPA is an available high-wattage configuration for experienced operators prepared to self-support a thin BSLcad ecosystem. The verified Amazon offer was $3,749.99 with limited stock on July 10, 2026, not under $1,000. Compare controller, work area, lens bundle, support, and return terms before checkout.
More Comparisons
GWEIKE G2 Max 50W Fiber Laser Engraver vs Monport 20W Fiber Laser EngraverMonport 20W Fiber Laser Engraver vs Monport 60W JPT MOPA Fiber LaserGWEIKE G2 20W Fiber Laser Engraver vs GWEIKE G2 Max 50W Fiber Laser EngraverGWEIKE G2 20W Fiber Laser Engraver vs Monport 60W JPT MOPA Fiber LaserComMarker B6 20W Fiber Laser Engraver vs GWEIKE G2 Max 50W Fiber Laser EngraverComMarker B6 20W Fiber Laser Engraver vs Monport 60W JPT MOPA Fiber LaserGWEIKE G2 Max 50W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber LaserMonport 30W JPT MOPA Fiber Laser vs Monport 60W JPT MOPA Fiber Laser