GWEIKE G2 20W Fiber Laser Engraver vs Monport 60W JPT MOPA Fiber Laser
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
GWEIKE
$1,299
Monport
$3,749.99
Verdict
It's a Tie
The GWEIKE G2 20W Fiber Laser Engraver and Monport 60W JPT MOPA Fiber Laser are evenly matched — your choice depends on which features matter most to you.
Spec-by-Spec Comparison
| Spec | GWEIKE G2 20W Fiber Laser Engraver | Monport 60W JPT MOPA Fiber Laser |
|---|---|---|
| Wattage | 20 W | 60 W |
| Laser Type | Q-Switched | MOPA |
| Laser Source | Raycus | JPT |
| Work Area (W) | 110 mm | 175 mm |
| Work Area (H) | 110 mm | 175 mm |
| Galvo Speed | 15000 mm/s | 8000 mm/s |
| Color Marking | No | Yes |
| LightBurn | Yes | Yes |
| Autofocus | No | No |
| Weight | 2.5 kg | 5 kg |
| Software | LightBurn + EZCad2 | BSLcad + LightBurn (galvo license required separately) |
| Pulse Width | N/A (Q-Switched) | 2–500ns |
| Price | $1,299 | $3,749.99 |
| Rating | 7.8/10 | 7.5/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
GWEIKE G2 20W Fiber Laser Engraver
Pros
- LightBurn workflow support is documented in the broader review evidence; confirm the current controller and license requirements with the seller
- The listing title carries a 15,000mm/s speed claim, but buyers should compare real-job evidence rather than infer throughput from catalog speed alone
- Raycus 20W source with documented reliability in knife-marking communities — a dedicated Italian cutlery review site (coltellimania.com, 14k views) independently validated the G2 for blade work
- 110×110mm work area covers rings, blade sections, small plaques, and coin marking without repositioning or compromising mark quality
- Active settings ecosystem: YouTube tutorials, LightBurn forum threads, and community settings libraries are indexed for the G2 specifically — problems you hit have been solved publicly
Cons
- Power-loss mid-job defect documented on LightBurn forum (June 2025) — mid-engraving power drop reported on some units; a workaround exists in settings but not every owner encounters it
- Customer service is WhatsApp-only with slow US response times — if something goes wrong, you are on your own until business hours in China; not viable for production-critical downtime
- Focus height calibration is poorly documented — community consensus is to calibrate by burn quality and sound rather than ruler measurement; GWEIKE's manual understates this complexity
- 110×110mm work area rules out tumblers and anything wider than a palm — if typical work pieces are over 100mm, step up to the ComMarker B6 (150mm field)
- No color marking — Q-switched laser cannot produce oxidation colors on stainless steel regardless of settings
Monport 60W JPT MOPA Fiber Laser
Pros
- The current title identifies a 60W JPT MOPA configuration, 6.9-inch square field, and rotary axis; confirm the exact bundle with the seller
- 175×175mm work area confirmed on the Amazon listing — accommodates full-size tumblers with a rotary chuck without lens swaps
- LightBurn galvo support confirmed via BSLcad controller — Amazon listing explicitly states 'All Monport fiber marking machines can be operated using Lightburn'
- 1–4,000kHz frequency range and 2–500ns pulse width provide the full MOPA parameter envelope for stainless steel color marking and titanium anodization
- 60W output is meaningfully faster than 30W for deep engraving — depth-map coin engraving documented by a Reddit owner using LightBurn 3D slice at production-viable speeds
Cons
- Only 16 Amazon ratings — too thin to verify factory QC or catch edge-case failures; at this wattage, a single DOA unit would represent 6% of all reviews
- No community material libraries for BSLcad exist anywhere — owners building color marking settings start from zero; the LightBurn parameter libraries that circulate for OMG Laser and ComMarker do not transfer
- In buyer comparison threads for 60W MOPA, Monport was explicitly excluded from recommendations due to 'unclear specs, lack of real user feedback' — OMG Laser and Haotian dominate those conversations
- MOPA settings complexity is brand-documented as brutal for newcomers — one Reddit owner described the transition from CO2 as 'feeling like I've never used technology before' with their Monport MOPA
- 60W is a Class 4 open-beam laser — no enclosure, invisible 1064nm infrared beam, requires OD5+ eyewear and a dedicated controlled workspace; not a beginner purchase at any price
Our Verdicts
GWEIKE G2 20W Fiber Laser Engraver
The GWEIKE G2 20W is the stronger 20W option for a buyer who prioritizes LightBurn continuity and public setup resources. Its 110mm field still limits larger work. The verified Amazon offer was $1,299 on July 10, 2026, so the old $499 value comparison is no longer a valid reason to buy. Compare its exact current configuration and support terms with the similarly priced Monport 20W before checkout.
Monport 60W JPT MOPA Fiber Laser
The Monport 60W MOPA is an available high-wattage configuration for experienced operators prepared to self-support a thin BSLcad ecosystem. The verified Amazon offer was $3,749.99 with limited stock on July 10, 2026, not under $1,000. Compare controller, work area, lens bundle, support, and return terms before checkout.
More Comparisons
GWEIKE G2 20W Fiber Laser Engraver vs Monport 20W Fiber Laser EngraverMonport 20W Fiber Laser Engraver vs Monport 60W JPT MOPA Fiber LaserComMarker B6 20W Fiber Laser Engraver vs GWEIKE G2 20W Fiber Laser EngraverComMarker B6 20W Fiber Laser Engraver vs Monport 60W JPT MOPA Fiber LaserGWEIKE G2 20W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber LaserMonport 30W JPT MOPA Fiber Laser vs Monport 60W JPT MOPA Fiber LaserComMarker B4 30W Fiber Laser Engraver vs GWEIKE G2 20W Fiber Laser EngraverComMarker B4 30W Fiber Laser Engraver vs Monport 60W JPT MOPA Fiber Laser