ComMarker B4 30W Fiber Laser Engraver vs Monport 60W JPT MOPA Fiber Laser
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
ComMarker
$699
Monport
$899
Verdict
It's a Tie
The ComMarker B4 30W Fiber Laser Engraver and Monport 60W JPT MOPA Fiber Laser are evenly matched — your choice depends on which features matter most to you.
Spec-by-Spec Comparison
| Spec | ComMarker B4 30W Fiber Laser Engraver | Monport 60W JPT MOPA Fiber Laser |
|---|---|---|
| Wattage | 30 W | 60 W |
| Laser Type | Q-Switched | MOPA |
| Laser Source | Raycus | JPT |
| Work Area (W) | 110 mm | 175 mm |
| Work Area (H) | 110 mm | 175 mm |
| Galvo Speed | 10000 mm/s | 8000 mm/s |
| Color Marking | No | Yes |
| LightBurn | Yes | Yes |
| Autofocus | No | No |
| Weight | 4.2 kg | 5 kg |
| Software | LightBurn + EZCad2 (LightBurn Galvo license required separately) | BSLcad + LightBurn (galvo license required separately) |
| Pulse Width | N/A (Q-Switched) | 2–500ns |
| Price | $699 | $899 |
| Rating | 8.2/10 | 7.5/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
ComMarker B4 30W Fiber Laser Engraver
Pros
- Dual-lens system included: 110mm lens (110×110mm field, sharper marks) and 200mm lens (200×200mm field, larger work) both in the box — two work areas for one price, rare in fiber lasers under $1,500
- Motorized electric Z-axis lifting built in — precise focus control without manual guessing; an autofocus-equivalent convenience normally seen in machines priced $2,000+
- LightBurn compatible with EZCad2 also included — both workflows supported; owners report LightBurn produces dramatically better deep engraving results than EZCad2 on this machine
- Deep engraving on aluminum, brass, steel, precious metals, and stone confirmed across multiple owner channels — 30W Raycus output handles production-depth marking reliably
- Handheld mode via detachable design — for large pieces or on-site marking that won't fit on the desktop platform, this is a workflow no other machine in this tier offers
Cons
- Q-switched only — no color marking on stainless steel; if color is needed, the separate B4 30W MOPA (ASIN B0DRY12JMW) has the JPT MOPA source; both use the B4 body but they are different machines
- LightBurn Galvo license not included — budget an additional $60–$80 beyond the machine price; a frequent surprise for buyers who expected plug-and-play LightBurn from existing licenses
- Initial LightBurn setup requires loading a markcfg7 config file and calibrating corfile field size for whichever lens is mounted — LightBurn forum threads show first-time owners spending hours on initial configuration
- No color marking — reinforcing the most important caveat: despite 'B4' appearing in ComMarker's MOPA lineup branding, this specific ASIN is the Raycus Q-switch variant; verify the ASIN if color marking is needed
- Customer support response is 24hr+ with documented language barriers — not viable for time-sensitive production downtime per LightBurn forum users
Monport 60W JPT MOPA Fiber Laser
Pros
- 60W JPT MOPA at $899 undercuts the ComMarker B4 60W MOPA by $200 with a matching 175×175mm work area and rotary axis included in the box
- 175×175mm work area confirmed on the Amazon listing — accommodates full-size tumblers with a rotary chuck without lens swaps
- LightBurn galvo support confirmed via BSLcad controller — Amazon listing explicitly states 'All Monport fiber marking machines can be operated using Lightburn'
- 1–4,000kHz frequency range and 2–500ns pulse width provide the full MOPA parameter envelope for stainless steel color marking and titanium anodization
- 60W output is meaningfully faster than 30W for deep engraving — depth-map coin engraving documented by a Reddit owner using LightBurn 3D slice at production-viable speeds
Cons
- Only 16 Amazon ratings — too thin to verify factory QC or catch edge-case failures; at this wattage, a single DOA unit would represent 6% of all reviews
- No community material libraries for BSLcad exist anywhere — owners building color marking settings start from zero; the LightBurn parameter libraries that circulate for OMG Laser and ComMarker do not transfer
- In buyer comparison threads for 60W MOPA, Monport was explicitly excluded from recommendations due to 'unclear specs, lack of real user feedback' — OMG Laser and Haotian dominate those conversations
- MOPA settings complexity is brand-documented as brutal for newcomers — one Reddit owner described the transition from CO2 as 'feeling like I've never used technology before' with their Monport MOPA
- 60W is a Class 4 open-beam laser — no enclosure, invisible 1064nm infrared beam, requires OD5+ eyewear and a dedicated controlled workspace; not a beginner purchase at any price
Our Verdicts
ComMarker B4 30W Fiber Laser Engraver
The ComMarker B4 30W is the machine to buy when deep, production-speed engraving on metals is the priority and color marking is not required. The dual-lens system (110mm + 200mm, both included) is a genuine differentiator — you can mark fine detail on jewelry at 110mm and switch to a full A4-size workpiece at 200mm without a second machine or aftermarket purchase. If color marking is in your roadmap at all, buy the OMTech 30W MOPA at a similar price or the B4 30W MOPA variant instead — you cannot add color capability to a Q-switched machine later. For monochrome production marking at volume, this is a fast, capable machine with real workflow flexibility.
Monport 60W JPT MOPA Fiber Laser
The Monport 60W MOPA is worth considering if you want the highest wattage color-marking machine under $1,000 and you have enough MOPA experience to build settings from scratch without community support. With only 16 Amazon reviews and near-zero BSLcad community resources, you are working without a safety net. The ComMarker B4 60W MOPA at $1,099 has documented settings, active LightBurn forum threads, and a track record — the $200 premium buys real support infrastructure. For experienced MOPA operators who know what they are doing, the Monport is a defensible value. For everyone else, pay the $200 and get the ComMarker.