ComMarker B4 30W Fiber Laser Engraver vs ComMarker B6 20W Fiber Laser Engraver
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
ComMarker
$699
ComMarker
$599
Spec-by-Spec Comparison
| Spec | ComMarker B4 30W Fiber Laser Engraver | ComMarker B6 20W Fiber Laser Engraver |
|---|---|---|
| Wattage | 30 W | 20 W |
| Laser Type | Q-Switched | Q-Switched |
| Laser Source | Raycus | Raycus |
| Work Area (W) | 110 mm | 150 mm |
| Work Area (H) | 110 mm | 150 mm |
| Galvo Speed | 10000 mm/s | 8000 mm/s |
| Color Marking | No | No |
| LightBurn | Yes | Yes |
| Autofocus | No | Yes |
| Weight | 4.2 kg | 3.5 kg |
| Software | LightBurn + EZCad2 (LightBurn Galvo license required separately) | LightBurn + EZCad |
| Pulse Width | N/A (Q-Switched) | N/A (Q-Switched) |
| Price | $699 | $599 |
| Rating | 8.2/10 | 8.0/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
ComMarker B4 30W Fiber Laser Engraver
Pros
- Dual-lens system included: 110mm lens (110×110mm field, sharper marks) and 200mm lens (200×200mm field, larger work) both in the box — two work areas for one price, rare in fiber lasers under $1,500
- Motorized electric Z-axis lifting built in — precise focus control without manual guessing; an autofocus-equivalent convenience normally seen in machines priced $2,000+
- LightBurn compatible with EZCad2 also included — both workflows supported; owners report LightBurn produces dramatically better deep engraving results than EZCad2 on this machine
- Deep engraving on aluminum, brass, steel, precious metals, and stone confirmed across multiple owner channels — 30W Raycus output handles production-depth marking reliably
- Handheld mode via detachable design — for large pieces or on-site marking that won't fit on the desktop platform, this is a workflow no other machine in this tier offers
Cons
- Q-switched only — no color marking on stainless steel; if color is needed, the separate B4 30W MOPA (ASIN B0DRY12JMW) has the JPT MOPA source; both use the B4 body but they are different machines
- LightBurn Galvo license not included — budget an additional $60–$80 beyond the machine price; a frequent surprise for buyers who expected plug-and-play LightBurn from existing licenses
- Initial LightBurn setup requires loading a markcfg7 config file and calibrating corfile field size for whichever lens is mounted — LightBurn forum threads show first-time owners spending hours on initial configuration
- No color marking — reinforcing the most important caveat: despite 'B4' appearing in ComMarker's MOPA lineup branding, this specific ASIN is the Raycus Q-switch variant; verify the ASIN if color marking is needed
- Customer support response is 24hr+ with documented language barriers — not viable for time-sensitive production downtime per LightBurn forum users
ComMarker B6 20W Fiber Laser Engraver
Pros
- 150×150mm work area — 35% larger than the GWEIKE G2's 110mm field — fits tumblers on a rotary chuck and full knife blades without repositioning
- Autofocus eliminates manual Z-axis setup every session — the only 20W fiber laser with autofocus in the sub-$600 tier; every other machine in this range requires manual focus adjustment
- LightBurn confirmed working with EZCad also included — both workflows supported; buyers coming from diode lasers have immediate LightBurn continuity
- Built-in touchscreen display for settings and job status — removes the need to monitor a laptop during production runs
- 20W Raycus Q-switched marks steel, aluminum, brass, titanium, and copper consistently — ComMarker's production volume means quality control is verified across thousands of units
Cons
- Q-switched only — no color marking on stainless steel regardless of settings; for any color on tumblers or jewelry, the minimum step up is the OMTech 30W MOPA at $699
- No enclosure — Class 4 open-beam fiber laser; the invisible 1064nm infrared beam requires OD5+ eyewear and either a dedicated enclosure or a controlled workspace with no reflective surfaces
- Thinner community than GWEIKE — fewer Reddit threads and YouTube settings tutorials; troubleshooting depends more on ComMarker support channels than community knowledge
- Rotary not included — cylindrical tumbler marking requires a separate chuck or roller rotary attachment ($45–$65) on top of machine cost
Our Verdicts
ComMarker B4 30W Fiber Laser Engraver
The ComMarker B4 30W is the machine to buy when deep, production-speed engraving on metals is the priority and color marking is not required. The dual-lens system (110mm + 200mm, both included) is a genuine differentiator — you can mark fine detail on jewelry at 110mm and switch to a full A4-size workpiece at 200mm without a second machine or aftermarket purchase. If color marking is in your roadmap at all, buy the OMTech 30W MOPA at a similar price or the B4 30W MOPA variant instead — you cannot add color capability to a Q-switched machine later. For monochrome production marking at volume, this is a fast, capable machine with real workflow flexibility.
ComMarker B6 20W Fiber Laser Engraver
The ComMarker B6 is the correct 20W pick when work area matters more than color capability. The 150mm field covers tumblers (with a rotary), full knife blades, and medium plaques that would require repositioning on a 110mm machine. Autofocus and the built-in display are genuine workflow upgrades over competitors at this price. If color marking is any part of your future roadmap, skip this machine — the B6 is Q-switched, and adding color capability later means buying a second machine. Buy the OMTech 30W MOPA at $699 instead. For monochrome marking on larger pieces with the most features in this tier, the B6 is the pick.