GWEIKE G2 20W Fiber Laser Engraver vs Monport 20W Fiber Laser Engraver
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
GWEIKE
$1,299
Monport
$1,299.99
Spec-by-Spec Comparison
| Spec | GWEIKE G2 20W Fiber Laser Engraver | Monport 20W Fiber Laser Engraver |
|---|---|---|
| Wattage | 20 W | 20 W |
| Laser Type | Q-Switched | Q-Switched |
| Laser Source | Raycus | Raycus |
| Work Area (W) | 110 mm | 110 mm |
| Work Area (H) | 110 mm | 110 mm |
| Galvo Speed | 15000 mm/s | 7000 mm/s |
| Color Marking | No | No |
| LightBurn | Yes | Yes |
| Autofocus | No | No |
| Weight | 2.5 kg | 3.2 kg |
| Software | LightBurn + EZCad2 | BSLcad + LightBurn (galvo license required separately) |
| Pulse Width | N/A (Q-Switched) | N/A (Q-Switched) |
| Price | $1,299 | $1,299.99 |
| Rating | 7.8/10 | 6.5/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
GWEIKE G2 20W Fiber Laser Engraver
Pros
- LightBurn workflow support is documented in the broader review evidence; confirm the current controller and license requirements with the seller
- The listing title carries a 15,000mm/s speed claim, but buyers should compare real-job evidence rather than infer throughput from catalog speed alone
- Raycus 20W source with documented reliability in knife-marking communities — a dedicated Italian cutlery review site (coltellimania.com, 14k views) independently validated the G2 for blade work
- 110×110mm work area covers rings, blade sections, small plaques, and coin marking without repositioning or compromising mark quality
- Active settings ecosystem: YouTube tutorials, LightBurn forum threads, and community settings libraries are indexed for the G2 specifically — problems you hit have been solved publicly
Cons
- Power-loss mid-job defect documented on LightBurn forum (June 2025) — mid-engraving power drop reported on some units; a workaround exists in settings but not every owner encounters it
- Customer service is WhatsApp-only with slow US response times — if something goes wrong, you are on your own until business hours in China; not viable for production-critical downtime
- Focus height calibration is poorly documented — community consensus is to calibrate by burn quality and sound rather than ruler measurement; GWEIKE's manual understates this complexity
- 110×110mm work area rules out tumblers and anything wider than a palm — if typical work pieces are over 100mm, step up to the ComMarker B6 (150mm field)
- No color marking — Q-switched laser cannot produce oxidation colors on stainless steel regardless of settings
Monport 20W Fiber Laser Engraver
Pros
- The current Amazon title explicitly says LightBurn compatible and BSLcad included; confirm controller and license requirements with the seller
- Raycus 20W source marks stainless steel, aluminum, brass, titanium, copper, and anodized aluminum consistently — the same source family used in machines twice the price
- Q-switched monochrome marks are deep and durable — serial numbers, logos, and ID marks survive heavy daily use without fading or rubbing off
- 110×110mm work area covers rings, dog tags, knife blade sections, and metal business cards without repositioning
- 3.2kg form factor is genuinely portable — moves between bench and jobsite without fixed infrastructure or dedicated workspace
Cons
- LightBurn setup on the BSLFiber controller is poorly documented — LightBurn forum (Jan 2025) rated Monport's galvo setup instructions 'horrible'; expect troubleshooting before first successful job
- The catalog's 10,000mm/s speed claim trails GWEIKE's 15,000mm/s claim; neither title-only claim proves real-job throughput
- No color marking — Q-switched fixed pulse width cannot produce oxidation colors on stainless steel regardless of settings or software
- No autofocus — manual Z-axis height setup required for every material change or thickness variation; a friction point that dedicated color-marking workflows cannot absorb
- BSLcad community resources are nearly nonexistent — unlike GWEIKE or OMTech, no active forum threads, settings libraries, or YouTube tutorials specific to BSLcad workflows
Our Verdicts
GWEIKE G2 20W Fiber Laser Engraver
The GWEIKE G2 20W is the stronger 20W option for a buyer who prioritizes LightBurn continuity and public setup resources. Its 110mm field still limits larger work. The verified Amazon offer was $1,299 on July 10, 2026, so the old $499 value comparison is no longer a valid reason to buy. Compare its exact current configuration and support terms with the similarly priced Monport 20W before checkout.
Monport 20W Fiber Laser Engraver
The Monport 20W remains a basic metal-marking option for buyers prepared to self-support a thinly documented BSLcad and LightBurn setup. The verified Amazon offer was $1,299.99 with limited stock on July 10, 2026, not the historical $349 configuration described in older copy. At essentially the same verified price as the GWEIKE G2 20W, choose on software support, work area, and seller terms rather than an outdated budget claim.
More Comparisons
ComMarker B6 20W Fiber Laser Engraver vs GWEIKE G2 20W Fiber Laser EngraverComMarker B6 20W Fiber Laser Engraver vs Monport 20W Fiber Laser EngraverGWEIKE G2 20W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber LaserMonport 20W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber LaserComMarker B4 30W Fiber Laser Engraver vs GWEIKE G2 20W Fiber Laser EngraverComMarker B4 30W Fiber Laser Engraver vs Monport 20W Fiber Laser EngraverGWEIKE G2 20W Fiber Laser Engraver vs OMTech 30W JPT MOPA Fiber Laser EngraverMonport 20W Fiber Laser Engraver vs OMTech 30W JPT MOPA Fiber Laser Engraver