GWEIKE G2 Max 50W Fiber Laser Engraver vs GWEIKE G2 Pro 30W Fiber Laser Engraver
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
GWEIKE
$2,499
GWEIKE
$1,799
Spec-by-Spec Comparison
| Spec | GWEIKE G2 Max 50W Fiber Laser Engraver | GWEIKE G2 Pro 30W Fiber Laser Engraver |
|---|---|---|
| Wattage | 50 W | 30 W |
| Laser Type | Q-Switched | Q-Switched |
| Laser Source | Raycus | Raycus |
| Work Area (W) | 150 mm | 150 mm |
| Work Area (H) | 150 mm | 150 mm |
| Galvo Speed | 15000 mm/s | 15000 mm/s |
| Color Marking | Yes | Yes |
| LightBurn | Yes | Yes |
| Autofocus | No | No |
| Weight | 6.5 kg | 6.5 kg |
| Software | LightBurn + EZCad | LightBurn + EZCad2 |
| Pulse Width | N/A (Q-Switched, 20–200kHz frequency range) | N/A (Q-Switched, 20–200kHz frequency range) |
| Price | $2,499 | $1,799 |
| Rating | 7.8/10 | 8.3/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
GWEIKE G2 Max 50W Fiber Laser Engraver
Pros
- 50W Raycus fiber at 15,000mm/s is the highest wattage-speed combination in this price bracket — deep engraving to 5mm on metal is a documented standout capability no 30W machine at any price matches
- GWEIKE's LightBurn driver is the most actively maintained of any Chinese fiber laser brand — after the initial x/y axis calibration, LightBurn integration runs without the COR file gymnastics that ComMarker requires
- 150×150mm work area with 50W handles large plaques, long knife blades, and production batch runs on a single setup
- Active LightBurn settings ecosystem with a 37-material community settings pack (Etsy) specific to the G2 Max 50W covering metals, plastics, and stone
- 6.5kg portable form factor with detachable laser head — the same lightweight chassis as the G2 Pro 30W, not the heavy industrial frame you would expect at 50W output
Cons
- NOT a MOPA laser — earlier specs on this site incorrectly listed it as MOPA/JPT; it is a Raycus Q-switched fiber laser; no controllable pulse width, no MOPA-quality color marking libraries
- Calibration out of box requires x/y axis swap in LightBurn — documented by a verified owner (machinesformakers.com, Sep 2025); not a defect but a configuration step GWEIKE's documentation does not explain
- Compare this 50W Q-switched configuration with current 60W MOPA offers by exact source, field, controller, and workflow rather than expired prices
- Color marking is thermal oxidation, not MOPA — achievable on stainless and titanium with tuning but less consistent and less repeatable than a JPT MOPA; best-lasercutter.com explicitly notes this limitation
- No enclosure, no autofocus, and documentation rated poor by multiple owners — 50W Class 4 open-beam requires full PPE and a controlled workspace from day one
GWEIKE G2 Pro 30W Fiber Laser Engraver
Pros
- The current title carries a 15,000mm/s speed claim; compare real-job evidence and controller settings before inferring production throughput
- Wide 20–200kHz frequency range enables thermal oxidation color on stainless steel and titanium — GWEIKE documents '90+ colorful engravings' and DIY Life reviewer confirmed distinct greens and reds on stainless (Nov 2024)
- GWEIKE's LightBurn driver is the most actively maintained of any Chinese fiber laser brand — no COR file gymnastics, no galvo axis swap workarounds; direct native LightBurn galvo support out of box
- 150×150mm work area handles most knife blades, tumblers with rotary, and medium plaques without repositioning
- Active LightBurn settings ecosystem with documented community resources: a dedicated Etsy seller offers a 37-material LightBurn library specific to the G2 Pro 30W covering metals, plastics, and stone
Cons
- Color marking is thermal oxidation, not MOPA — results require experimentation per material and are less consistent and repeatable than a JPT MOPA machine; do not expect plug-and-play stainless color
- Focus height calibration is measured from lens center, not machine frame — GWEIKE's manual doesn't clarify this; every new owner mis-sets focus initially and must recalibrate by sound and burn quality (LightBurn forum, Feb 2026)
- Customer service is WhatsApp-only with inconsistent quality — best-lasercutter.com rates it 'a gamble'; not viable for production-critical environments with tight turnaround requirements
- The built-in fan is not a substitute for a verified fume-control plan appropriate to the marked material and workspace
- Native G-Laser software is frustrating and feature-poor — nearly all users switch immediately to LightBurn; do not evaluate the machine on G-Laser
Our Verdicts
GWEIKE G2 Max 50W Fiber Laser Engraver
The GWEIKE G2 Max 50W is a Q-switched, 50W configuration for buyers prioritizing engraving speed over MOPA pulse control. The verified Amazon offer was $2,499 on July 10, 2026. Compare it against current 60W MOPA offers by exact source, controller, work area, and support rather than the expired $1,199 comparison.
GWEIKE G2 Pro 30W Fiber Laser Engraver
The GWEIKE G2 Pro is a fast Q-switched option with a 150mm field and an extended frequency range. The verified Amazon offer was $1,799 on July 10, 2026, so the old under-$900 comparison is invalid. Buyers focused on repeatable MOPA workflows should compare available true-MOPA configurations rather than the currently unavailable OMTech ASIN referenced in older copy.
More Comparisons
GWEIKE G2 Max 50W Fiber Laser Engraver vs Monport 20W Fiber Laser EngraverGWEIKE G2 Pro 30W Fiber Laser Engraver vs Monport 20W Fiber Laser EngraverGWEIKE G2 20W Fiber Laser Engraver vs GWEIKE G2 Max 50W Fiber Laser EngraverGWEIKE G2 20W Fiber Laser Engraver vs GWEIKE G2 Pro 30W Fiber Laser EngraverComMarker B6 20W Fiber Laser Engraver vs GWEIKE G2 Max 50W Fiber Laser EngraverComMarker B6 20W Fiber Laser Engraver vs GWEIKE G2 Pro 30W Fiber Laser EngraverGWEIKE G2 Max 50W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber LaserGWEIKE G2 Pro 30W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber Laser