GWEIKE G2 Pro 30W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber Laser
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
GWEIKE
$1,799
Monport
$2,899.99
Spec-by-Spec Comparison
| Spec | GWEIKE G2 Pro 30W Fiber Laser Engraver | Monport 30W JPT MOPA Fiber Laser |
|---|---|---|
| Wattage | 30 W | 30 W |
| Laser Type | Q-Switched | MOPA |
| Laser Source | Raycus | JPT |
| Work Area (W) | 150 mm | 175 mm |
| Work Area (H) | 150 mm | 175 mm |
| Galvo Speed | 15000 mm/s | 8000 mm/s |
| Color Marking | Yes | Yes |
| LightBurn | Yes | Yes |
| Autofocus | No | No |
| Weight | 6.5 kg | 4 kg |
| Software | LightBurn + EZCad2 | BSLcad + LightBurn (galvo license required separately) |
| Pulse Width | N/A (Q-Switched, 20–200kHz frequency range) | 2–500ns |
| Price | $1,799 | $2,899.99 |
| Rating | 8.3/10 | 7.2/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
GWEIKE G2 Pro 30W Fiber Laser Engraver
Pros
- The current title carries a 15,000mm/s speed claim; compare real-job evidence and controller settings before inferring production throughput
- Wide 20–200kHz frequency range enables thermal oxidation color on stainless steel and titanium — GWEIKE documents '90+ colorful engravings' and DIY Life reviewer confirmed distinct greens and reds on stainless (Nov 2024)
- GWEIKE's LightBurn driver is the most actively maintained of any Chinese fiber laser brand — no COR file gymnastics, no galvo axis swap workarounds; direct native LightBurn galvo support out of box
- 150×150mm work area handles most knife blades, tumblers with rotary, and medium plaques without repositioning
- Active LightBurn settings ecosystem with documented community resources: a dedicated Etsy seller offers a 37-material LightBurn library specific to the G2 Pro 30W covering metals, plastics, and stone
Cons
- Color marking is thermal oxidation, not MOPA — results require experimentation per material and are less consistent and repeatable than a JPT MOPA machine; do not expect plug-and-play stainless color
- Focus height calibration is measured from lens center, not machine frame — GWEIKE's manual doesn't clarify this; every new owner mis-sets focus initially and must recalibrate by sound and burn quality (LightBurn forum, Feb 2026)
- Customer service is WhatsApp-only with inconsistent quality — best-lasercutter.com rates it 'a gamble'; not viable for production-critical environments with tight turnaround requirements
- The built-in fan is not a substitute for a verified fume-control plan appropriate to the marked material and workspace
- Native G-Laser software is frustrating and feature-poor — nearly all users switch immediately to LightBurn; do not evaluate the machine on G-Laser
Monport 30W JPT MOPA Fiber Laser
Pros
- The current title identifies a 30W JPT MOPA configuration with BSLcad and LightBurn references; verify the exact controller and bundle before buying
- JPT MOPA source with 2–500ns variable pulse width — the physics required for oxide-layer color marking on stainless steel are present; this is confirmed hardware, not a marketing claim
- BSLcad bundled with LightBurn galvo support available — not EZCad2; buyers from diode lasers can continue a LightBurn workflow (galvo license purchased separately)
- 30W output handles deep engraving on stainless, aluminum, and brass in fewer passes than any 20W Q-switched alternative
- Color marking on stainless, titanium, and anodized aluminum is achievable once settings are dialed — a capability this price tier has no business offering
Cons
- MOPA settings are not plug-and-play — frequency, pulse width, and power interact in non-obvious ways; one Reddit owner described the transition from CO2 as 'feeling like I've never used technology before' after buying a Monport MOPA
- No material parameter library for BSLcad exists in any community channel — unlike OMTech or ComMarker, no Etsy settings packs or forum parameter threads exist for this specific machine
- Monport's documentation rated 'horrible' for galvo setup by experienced fiber users — expect several hours of calibration before achieving first successful color mark
- The current Amazon title states a 6.9×6.9-inch work area; confirm the exact lens and usable field with the seller before checkout
- Very thin review base — this is a recent Amazon listing; no volume of owner feedback exists to verify factory QC or consistency across units
Our Verdicts
GWEIKE G2 Pro 30W Fiber Laser Engraver
The GWEIKE G2 Pro is a fast Q-switched option with a 150mm field and an extended frequency range. The verified Amazon offer was $1,799 on July 10, 2026, so the old under-$900 comparison is invalid. Buyers focused on repeatable MOPA workflows should compare available true-MOPA configurations rather than the currently unavailable OMTech ASIN referenced in older copy.
Monport 30W JPT MOPA Fiber Laser
The Monport 30W MOPA is relevant to experienced operators who need variable pulse-width control and are prepared for thin BSLcad-specific documentation. The verified Amazon offer was $2,899.99 with limited stock on July 10, 2026, not $599. At that price, compare support, controller, lens, work area, and return terms against other available MOPA configurations before buying.
More Comparisons
GWEIKE G2 Pro 30W Fiber Laser Engraver vs Monport 20W Fiber Laser EngraverMonport 20W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber LaserGWEIKE G2 20W Fiber Laser Engraver vs GWEIKE G2 Pro 30W Fiber Laser EngraverGWEIKE G2 20W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber LaserComMarker B6 20W Fiber Laser Engraver vs GWEIKE G2 Pro 30W Fiber Laser EngraverComMarker B6 20W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber LaserComMarker B4 30W Fiber Laser Engraver vs GWEIKE G2 Pro 30W Fiber Laser EngraverComMarker B4 30W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber Laser