GWEIKE G2 Pro 30W Fiber Laser Engraver vs OMTech 30W JPT MOPA Fiber Laser Engraver

Head-to-head spec comparison to help you pick the right fiber laser for your needs.

GWEIKE

$1,799

OMTech

Unavailable

Verdict

It's a Tie

The GWEIKE G2 Pro 30W Fiber Laser Engraver and OMTech 30W JPT MOPA Fiber Laser Engraver are evenly matched — your choice depends on which features matter most to you.

Spec-by-Spec Comparison

Spec	GWEIKE G2 Pro 30W Fiber Laser Engraver	OMTech 30W JPT MOPA Fiber Laser Engraver
Wattage	30 W	30 W
Laser Type	Q-Switched	MOPA
Laser Source	Raycus	JPT
Work Area (W)	150 mm	150 mm
Work Area (H)	150 mm	150 mm
Galvo Speed	15000 mm/s	8000 mm/s
Color Marking	Yes	Yes
LightBurn	Yes	Yes
Autofocus	No	No
Weight	6.5 kg	4.5 kg
Software	LightBurn + EZCad2	LightBurn + EZCad2 (verify bundled on your ASIN)
Pulse Width	N/A (Q-Switched, 20–200kHz frequency range)	2–500ns
Price	$1,799	Unavailable
Rating	8.3/10	8.4/10
	Buy on Amazon	Amazon offer unavailable (checked 2026-07-10)

Pros & Cons

GWEIKE G2 Pro 30W Fiber Laser Engraver

Pros

The current title carries a 15,000mm/s speed claim; compare real-job evidence and controller settings before inferring production throughput
Wide 20–200kHz frequency range enables thermal oxidation color on stainless steel and titanium — GWEIKE documents '90+ colorful engravings' and DIY Life reviewer confirmed distinct greens and reds on stainless (Nov 2024)
GWEIKE's LightBurn driver is the most actively maintained of any Chinese fiber laser brand — no COR file gymnastics, no galvo axis swap workarounds; direct native LightBurn galvo support out of box
150×150mm work area handles most knife blades, tumblers with rotary, and medium plaques without repositioning
Active LightBurn settings ecosystem with documented community resources: a dedicated Etsy seller offers a 37-material LightBurn library specific to the G2 Pro 30W covering metals, plastics, and stone

Cons

Color marking is thermal oxidation, not MOPA — results require experimentation per material and are less consistent and repeatable than a JPT MOPA machine; do not expect plug-and-play stainless color
Focus height calibration is measured from lens center, not machine frame — GWEIKE's manual doesn't clarify this; every new owner mis-sets focus initially and must recalibrate by sound and burn quality (LightBurn forum, Feb 2026)
Customer service is WhatsApp-only with inconsistent quality — best-lasercutter.com rates it 'a gamble'; not viable for production-critical environments with tight turnaround requirements
The built-in fan is not a substitute for a verified fume-control plan appropriate to the marked material and workspace
Native G-Laser software is frustrating and feature-poor — nearly all users switch immediately to LightBurn; do not evaluate the machine on G-Laser

OMTech 30W JPT MOPA Fiber Laser Engraver

Pros

The current listing title identifies a JPT source; source model and rated life should be confirmed in the exact seller documentation
150×150mm work area with rotary axis confirmed included in ASIN B0DCFGK6PX — covers tumblers with rotation and most jewelry without repositioning
Variable pulse width 2–500ns with 1–4,000kHz frequency range gives precise oxide-layer color control on stainless steel and titanium — specific settings (e.g. power 45%, speed 1000mm/s, pulse 60ns, freq 400 for red on SS) are documented in community threads
OMTech's LightBurn compatibility works on Windows, macOS, and Linux — rare for Chinese fiber lasers; most EZCad-only competitors require Windows exclusively
Largest community presence of any MOPA brand at this price: LightBurn forum history, YouTube reviews, and documented settings libraries predate this model and are actively maintained

Cons

DOA/shipping damage reported across multiple sources — packaging is adequate but component fragility during long shipping is a recurring theme; inspect immediately on arrival
ASIN B0DCFGK6PX may be EZCad-only — Amazon title says 'EZCad Galvo Lens'; a separate ASIN (B0DSZ8PLLY) explicitly bundles LightBurn; verify which listing you're buying before purchasing
Customer support is slower than Monport's direct-site models and not as consistent as OMTech's marketing implies — LightBurn forum users note 24hr+ turnaround and first-line agents who don't always understand the issue
Color marking requires systematic material testing per batch — oxide colors on stainless are parameter-sensitive; alloy composition and powder coat thickness vary between tumbler batches, requiring fresh test grids

Our Verdicts

GWEIKE G2 Pro 30W Fiber Laser Engraver

The GWEIKE G2 Pro is a fast Q-switched option with a 150mm field and an extended frequency range. The verified Amazon offer was $1,799 on July 10, 2026, so the old under-$900 comparison is invalid. Buyers focused on repeatable MOPA workflows should compare available true-MOPA configurations rather than the currently unavailable OMTech ASIN referenced in older copy.

OMTech 30W JPT MOPA Fiber Laser Engraver

The OMTech 30W MOPA has a 150mm field and a JPT MOPA source, but ASIN B0DCFGK6PX was out of stock with no current Amazon price on July 10, 2026. Hobbyist Laser does not expose a buying link or Offer JSON-LD while that remains true. Verify the exact controller, included software, seller, return policy, price, and availability before reconsidering it.

GWEIKE G2 Pro 30W Fiber Laser Engraver

$1,799

Buy on Amazon

OMTech 30W JPT MOPA Fiber Laser Engraver

No current Amazon offer

Amazon offer unavailable (checked 2026-07-10)

More Comparisons