ComMarker B4 60W JPT MOPA Fiber Laser vs ComMarker B6 20W Fiber Laser Engraver
Head-to-head spec comparison to help you pick the right fiber laser for your needs.
ComMarker
$3,699
ComMarker
$1,599
Spec-by-Spec Comparison
| Spec | ComMarker B4 60W JPT MOPA Fiber Laser | ComMarker B6 20W Fiber Laser Engraver |
|---|---|---|
| Wattage | 60 W | 20 W |
| Laser Type | MOPA | Q-Switched |
| Laser Source | JPT | Raycus |
| Work Area (W) | 175 mm | 150 mm |
| Work Area (H) | 175 mm | 150 mm |
| Galvo Speed | 10000 mm/s | 8000 mm/s |
| Color Marking | Yes | No |
| LightBurn | Yes | Yes |
| Autofocus | No | Yes |
| Weight | 5.5 kg | 3.5 kg |
| Software | LightBurn + EZCad2 (LightBurn requires COR file setup) | LightBurn + EZCad |
| Pulse Width | 2–500ns | N/A (Q-Switched) |
| Price | $3,699 | $1,599 |
| Rating | 9.0/10 | 8.0/10 |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
ComMarker B4 60W JPT MOPA Fiber Laser
Pros
- JPT M7 MOPA source confirmed — wider frequency range (1–4,000kHz) and tighter pulse consistency than Raycus Q-switched alternatives at any price; the datasheet comes in the box
- The catalog combines 60W MOPA and a 10,000mm/s speed claim; production throughput still depends on material, settings, field, and workflow
- LightBurn compatible via COR file — both LightBurn and EZCad2 workflows supported; JPT M7's full pulse-width parameter range is accessible from LightBurn's galvo interface once configured
- Rust cleaning at 60W is a documented bonus capability — removes surface oxide from steel without abrasives, useful as pre-treatment before color marking on weathered material
- Foot pedal input, job preview function, and fan that only runs during active engraving — the small-business production workflow details that distinguish a tool from a toy
Cons
- LightBurn setup requires loading a COR file and manually configuring galvo axis, Q-Pulse Width, and frequency settings — LightBurn forum (April 2026) shows new owners needing 30+ minutes before getting first correct results; not auto-detected
- No autofocus — manual Z-axis focus required for every workpiece height change; the B6 MOPA, ComMarker's current flagship, corrects this limitation
- B4 MOPA line is end-of-life inventory — ComMarker now promotes the B6 MOPA (autofocus, updated form factor, same 60W power); ASIN B0CGX9TBGQ remains on Amazon but community resources will increasingly reference the B6 going forward
- Color marking requires calibration per material batch — powder coat thickness and alloy composition vary even within the same tumbler brand, requiring fresh test grids for each new batch
- No enclosure — Class 4 open-beam 1064nm infrared; requires OD6+ eyewear at 60W and either ComMarker's Safety Enclosure Pro or a dedicated controlled workspace
ComMarker B6 20W Fiber Laser Engraver
Pros
- 150×150mm work area — 35% larger than the GWEIKE G2's 110mm field — fits tumblers on a rotary chuck and full knife blades without repositioning
- The current title identifies an autofocus screen, a meaningful workflow distinction from manual-focus 20W alternatives
- LightBurn confirmed working with EZCad also included — both workflows supported; buyers coming from diode lasers have immediate LightBurn continuity
- Built-in touchscreen display for settings and job status — removes the need to monitor a laptop during production runs
- 20W Raycus Q-switched marks steel, aluminum, brass, titanium, and copper consistently — ComMarker's production volume means quality control is verified across thousands of units
Cons
- Cataloged as Q-switched rather than MOPA; compare a currently available MOPA configuration when pulse-width control is required
- No enclosure — Class 4 open-beam fiber laser; the invisible 1064nm infrared beam requires OD5+ eyewear and either a dedicated enclosure or a controlled workspace with no reflective surfaces
- Thinner community than GWEIKE — fewer Reddit threads and YouTube settings tutorials; troubleshooting depends more on ComMarker support channels than community knowledge
- The current title does not confirm an included rotary; verify the exact bundle before planning cylindrical work
Our Verdicts
ComMarker B4 60W JPT MOPA Fiber Laser
The ComMarker B4 60W MOPA remains the highest-rated configuration in this catalog for buyers who value 60W JPT MOPA capability and can work within its field size. The verified Amazon offer was $3,699 with limited stock on July 10, 2026, not under $1,100. Confirm the exact lens bundle, controller, seller terms, price, and stock before treating it as the right production purchase.
ComMarker B6 20W Fiber Laser Engraver
The ComMarker B6 is the 20W option to compare when a 150mm field and autofocus matter more than MOPA pulse control. The verified Amazon offer was $1,599 on July 10, 2026. That price removes it from any under-$600 decision path. If color work is required, compare an available MOPA configuration instead of following the currently unavailable OMTech 30W exit.
More Comparisons
ComMarker B4 60W JPT MOPA Fiber Laser vs Monport 20W Fiber Laser EngraverComMarker B6 20W Fiber Laser Engraver vs Monport 20W Fiber Laser EngraverComMarker B4 60W JPT MOPA Fiber Laser vs GWEIKE G2 20W Fiber Laser EngraverComMarker B6 20W Fiber Laser Engraver vs GWEIKE G2 20W Fiber Laser EngraverComMarker B4 60W JPT MOPA Fiber Laser vs Monport 30W JPT MOPA Fiber LaserComMarker B6 20W Fiber Laser Engraver vs Monport 30W JPT MOPA Fiber LaserComMarker B4 30W Fiber Laser Engraver vs ComMarker B4 60W JPT MOPA Fiber LaserComMarker B4 30W Fiber Laser Engraver vs ComMarker B6 20W Fiber Laser Engraver